From 79b6705bfc60ed17ddbf6c36ead99e9f5c3c7404 Mon Sep 17 00:00:00 2001
From: Bent Bisballe Nyeng <deva@aasimon.org>
Date: Wed, 26 Feb 2014 21:06:30 +0100
Subject: Old SPI code is now disabled, new SPI code succesfully reads out
 WM8523 chip id. Needs lots of cleaning...

---
 firmware/drivers/timer.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 firmware/drivers/timer.h

(limited to 'firmware/drivers/timer.h')

diff --git a/firmware/drivers/timer.h b/firmware/drivers/timer.h
new file mode 100644
index 0000000..1f16976
--- /dev/null
+++ b/firmware/drivers/timer.h
@@ -0,0 +1,47 @@
+/****************************************************************************
+ *   $Id:: timer.h 5823 2010-12-07 19:01:00Z usb00423                       $
+ *   Project: NXP LPC17xx Timer example
+ *
+ *   Description:
+ *     This file contains Timer code header definition.
+ *
+ ****************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+****************************************************************************/
+#ifndef __TIMER_H 
+#define __TIMER_H
+
+/* The test is either MAT_OUT or CAP_IN. Default is MAT_OUT. */
+/* If running DMA test, External match is not needed to trigger DMA, but still 
+set timer as MATx instead of CAPx. */
+#define TIMER_MATCH		1
+	
+/* TIME_INTERVALmS is a value to load the timer match register with
+   to get a 1 mS delay */
+#define TIME_INTERVALmS	1000
+
+#define TIME_INTERVAL	(9000000/100 - 1)
+
+extern void delayMs(uint8_t timer_num, uint32_t delayInMs);
+extern uint32_t TimerInit( uint8_t timer_num, uint32_t timerInterval );
+extern void enable_timer( uint8_t timer_num );
+extern void disable_timer( uint8_t timer_num );
+extern void reset_timer( uint8_t timer_num );
+extern void TIMER0_interrupt  (void);
+extern void TIMER1_interrupt (void);
+extern void TIMER2_interrupt (void);
+extern void TIMER3_interrupt (void);
+
+#endif /* end __TIMER_H */
+/*****************************************************************************
+**                            End Of File
+******************************************************************************/
-- 
cgit v1.2.3